CONTACT US
0
Skip to Content
CEDAR RIDGE FABRICATION
NSX
LOTUS
CUSTOM SERVICES
STORE
ABOUT
CONTACT US
SEARCH
CEDAR RIDGE FABRICATION
NSX
LOTUS
CUSTOM SERVICES
STORE
ABOUT
CONTACT US
SEARCH
NSX
LOTUS
CUSTOM SERVICES
STORE
Folder: ABOUT
Back
CONTACT US
SEARCH
STORE NSX/ Hardened Front Motor Mount
Hardening Plates.jpg Image 1 of 2
Hardening Plates.jpg
IMG_4062.jpg Image 2 of 2
IMG_4062.jpg
Hardening Plates.jpg
IMG_4062.jpg

NSX/ Hardened Front Motor Mount

from $20.00

NSX 1991 - 2005 motor mounts are a wear item that have low availability. CRF created this simple solution to restore or harden your front motor mount, creating more efficient power transfer to the chassis of your NSX.

OPTION 1: CRF will harden your mount. -- $100.00

Send us your cracked or even completely broken motor mounts. We use 60 durometer castable Urethane in the shop to make the hardened mounts and will return them to you.

OPTION 2: CRF will exchange your mount. --$100.00 + $500.00 deposit

We can also send you hardened mounts with an additional $500 (100% refundable) deposit. After you receive our parts, you can send in cracked or even completely broken motor mounts for full refund of your deposit.

OPTION 3: CRF Hardening Plate Kit. -- $20.00

This is a simple tool for repairing cracked or broken NSX motor mounts. A pair of plates align the inner spacer with the outer body of the motor mount, assuring the correct orientation of the engine when the hardened mount is installed in your NSX. Sold as a pair, one set will be enough to harden either the front motor mount or the rear transmission mount (manual or automatic).

Hardening Plate Kit Tips: Once the plates are installed use the filler of your choice to 'harden' the mount and maintain the orientation, the plates support the filler to make a stronger bond and allow the largest amount of fill possible because of the conic shape. We recommend removing as much of the ‘bumper’ rubber from the top and bottom of the OEM mount to maximize the amount of urethane you cast into the mount which makes for a stronger mount and less chance the fill will crack over time.

Once the mount is set, most customers leave the plates in place but they can be removed if a softer mount is desired.

At CRF we use 60 durometer castable Urethane to make the hardened mounts we offer for exchange; you can use any product you choose as long as it is oil and heat resistant.

Note: We only offer hardening kits for the lower NSX mounts because these are the most effective counteracting the forces of the motor without adding undue vibration through the chassis.

Service:
Quantity:
Add To Cart

NSX 1991 - 2005 motor mounts are a wear item that have low availability. CRF created this simple solution to restore or harden your front motor mount, creating more efficient power transfer to the chassis of your NSX.

OPTION 1: CRF will harden your mount. -- $100.00

Send us your cracked or even completely broken motor mounts. We use 60 durometer castable Urethane in the shop to make the hardened mounts and will return them to you.

OPTION 2: CRF will exchange your mount. --$100.00 + $500.00 deposit

We can also send you hardened mounts with an additional $500 (100% refundable) deposit. After you receive our parts, you can send in cracked or even completely broken motor mounts for full refund of your deposit.

OPTION 3: CRF Hardening Plate Kit. -- $20.00

This is a simple tool for repairing cracked or broken NSX motor mounts. A pair of plates align the inner spacer with the outer body of the motor mount, assuring the correct orientation of the engine when the hardened mount is installed in your NSX. Sold as a pair, one set will be enough to harden either the front motor mount or the rear transmission mount (manual or automatic).

Hardening Plate Kit Tips: Once the plates are installed use the filler of your choice to 'harden' the mount and maintain the orientation, the plates support the filler to make a stronger bond and allow the largest amount of fill possible because of the conic shape. We recommend removing as much of the ‘bumper’ rubber from the top and bottom of the OEM mount to maximize the amount of urethane you cast into the mount which makes for a stronger mount and less chance the fill will crack over time.

Once the mount is set, most customers leave the plates in place but they can be removed if a softer mount is desired.

At CRF we use 60 durometer castable Urethane to make the hardened mounts we offer for exchange; you can use any product you choose as long as it is oil and heat resistant.

Note: We only offer hardening kits for the lower NSX mounts because these are the most effective counteracting the forces of the motor without adding undue vibration through the chassis.

NSX 1991 - 2005 motor mounts are a wear item that have low availability. CRF created this simple solution to restore or harden your front motor mount, creating more efficient power transfer to the chassis of your NSX.

OPTION 1: CRF will harden your mount. -- $100.00

Send us your cracked or even completely broken motor mounts. We use 60 durometer castable Urethane in the shop to make the hardened mounts and will return them to you.

OPTION 2: CRF will exchange your mount. --$100.00 + $500.00 deposit

We can also send you hardened mounts with an additional $500 (100% refundable) deposit. After you receive our parts, you can send in cracked or even completely broken motor mounts for full refund of your deposit.

OPTION 3: CRF Hardening Plate Kit. -- $20.00

This is a simple tool for repairing cracked or broken NSX motor mounts. A pair of plates align the inner spacer with the outer body of the motor mount, assuring the correct orientation of the engine when the hardened mount is installed in your NSX. Sold as a pair, one set will be enough to harden either the front motor mount or the rear transmission mount (manual or automatic).

Hardening Plate Kit Tips: Once the plates are installed use the filler of your choice to 'harden' the mount and maintain the orientation, the plates support the filler to make a stronger bond and allow the largest amount of fill possible because of the conic shape. We recommend removing as much of the ‘bumper’ rubber from the top and bottom of the OEM mount to maximize the amount of urethane you cast into the mount which makes for a stronger mount and less chance the fill will crack over time.

Once the mount is set, most customers leave the plates in place but they can be removed if a softer mount is desired.

At CRF we use 60 durometer castable Urethane to make the hardened mounts we offer for exchange; you can use any product you choose as long as it is oil and heat resistant.

Note: We only offer hardening kits for the lower NSX mounts because these are the most effective counteracting the forces of the motor without adding undue vibration through the chassis.

You Might Also Like

blueshifterlinkmounted1.jpg blueshifterlinkmounted1.jpg blueshifterlinkmounted1.jpg blueshifterlinkmounted1.jpg
NSX/ Short Shift Kit
$60.00
NSX/ True Tension Belt Tensioner for Comptech Supercharger TTtensionergettingpulley.jpg TTtensionerinplace_backside.jpg 350-010.jpg
NSX/ True Tension Belt Tensioner for Comptech Supercharger
$90.00
NSX/ Blow-by Catch Can, valve cover mod DSCN5762.JPG DSCN5763.JPG DSCN5764.JPG DSCN5766.JPG Front valve cover oil line fitting.JPG Rear valve cover oil line.JPG blow by lines tee fitting.JPG
NSX/ Blow-by Catch Can, valve cover mod
from $90.00
NSX Synthetic Transmission Oil/DumondeTech Gear 9 (75W90 Weight) Wavetrac NSX differential assembled veiw, 12-02-2021.jpg Wavetrac NSX differential exploded veiw, 12-02-2021.jpg
NSX Synthetic Transmission Oil/DumondeTech Gear 9 (75W90 Weight)
$120.00
NSX Rear tow hook, stainless.JPG NSX Rear tow hook, stainless.JPG NSX Rear tow hook, stainless.JPG NSX Rear tow hook, stainless.JPG NSX Rear tow hook, stainless.JPG NSX Rear tow hook, stainless.JPG NSX Rear tow hook, stainless.JPG NSX Rear tow hook, stainless.JPG NSX Rear tow hook, stainless.JPG NSX Rear tow hook, stainless.JPG NSX Rear tow hook, stainless.JPG NSX Rear tow hook, stainless.JPG
NSX/ Tow Hook Set
$175.00
top.png

ABOUT

Contact Us

SUPPORT

Services
Terms & Conditions
Privacy
Terms of Use

PRODUCTS

NSX
Lotus
Custom Services
Store

SOCIAL

SEARCH

 

 PRIVACY • TERMS OF USE
© 2021 Titanium Dave Productions. All Rights Reserved.